St.Lawrencd from BL

Moderators: Daves, admin, Phil, billbo

Post Reply
BassAkwards
Registered User
Posts: 14
Joined: Wed Jul 22, 2015 8:21 am
Contact:

St.Lawrencd from BL

Post by BassAkwards » Sun Jul 03, 2016 6:27 pm

Can you make it by water from BL to the St. Lawrence safely? I've never ventured much beyond the lake up towards the St. lawrence

fishinmagician
Registered User
Posts: 108
Joined: Sat Mar 06, 2010 6:13 pm
Location: New Jersey
Contact:

Re: St.Lawrencd from BL

Post by fishinmagician » Mon Jul 04, 2016 12:44 am

If you take the left fork in the river after BL merges with the Oswegatchie River you will encounter a physical barrier that won't allow you to go up to the St. Lawrence. Depending on the time of year, the upper section of the lake gets pretty well weed choked. Going up that far could cause some over heating issues with your outboard. Hope this answers your question.
The second amendment is in place, in case THEY decide to ignore all the others.

Phil
Site Admin
Posts: 1179
Joined: Mon Dec 01, 2008 3:37 pm
Location: Ogdensburg, NY
Contact:

Re: St.Lawrencd from BL

Post by Phil » Mon Jul 04, 2016 1:45 am

You would be headed "down" towards the St. Lawrence. Just to be technical.
Image
Phil

fishinmagician
Registered User
Posts: 108
Joined: Sat Mar 06, 2010 6:13 pm
Location: New Jersey
Contact:

Re: St.Lawrencd from BL

Post by fishinmagician » Tue Jul 12, 2016 1:20 pm

Phil, many of us are aware that BL flows from SW to NE. My reference of going UP to the St. Lawrence was that of a compass heading not the flow direction of the lake. If you ask how to get to the Edwardsville Bridge, and you were near Hog Back Island, most people would say head North, you can't miss it. Thanks for being Technical.
The second amendment is in place, in case THEY decide to ignore all the others.

Phil
Site Admin
Posts: 1179
Joined: Mon Dec 01, 2008 3:37 pm
Location: Ogdensburg, NY
Contact:

Re: St.Lawrencd from BL

Post by Phil » Tue Jul 12, 2016 4:34 pm

:big-grin: Yep!
Image
Phil

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 5 guests